Plastic Reinforcement HDPE Geocell Solutions For Breakwater Slope Protection
Key Attributes
| High Light: | Plastic Geocell Solutions Slope Protection,Reinforcement Geocell Solutions,hdpe geocells for Breakwater |
The geocell is a three-dimensional grid cell structure formed by reinforced HDPE material with ultrasonic welding. And it is a three-dimensional network after being ex- panded. Due to engineering needs, some holes are punched in the diaphragm. It is mainly divided into geocell, high-strength geocell, and honeycomb restraint sys- tem (Honeycomb restraint system: it is a three-dimensional network made of polymer broadband with ultrasonic welding, and the cells constitute a strong lateral restraints and stiffness structure by filling with materials such as sand, stone or concrete).
It is mainly used in foundation reinforcement, soft foundation treatment, steep slope protection, landslide prevention, load-bearing gravity hybrid wall, and it is especially suit- able for weathered mountain forests, deserts and swamps.
- It is capable of expansion and contraction, and it can be folded dur- ing transportation and stretched during construction. It constitutes a strong lateral restraint and stiffness structure by filling with materials such as sand- stone or concrete.
- It is formed by light material with stable chemical properties which is resistant to abrasion, photooxidation, acid, and alkali. It is suitable for differ- entsoil and desert conditions.
- It has a higher lateral limit, anti-skid, and anti-deformation, and can effectively enhance the bearing capacity of the roadbed and load distribu- tion.
- It can meet different engineering needs by changing height, welding distance, and other geometric dimensions.
- It is convenient to connect and can improve construction speed.
| Material Properties | Unit | Test Method | ||||
|---|---|---|---|---|---|---|
| Cell Depth | mm | 75 | 100 | 150 | 200 | |
| Welding Distance | mm | 330, 400, 440, 500, 600, 660, 800, 1000 | ||||
| Polymer Density | g/cm3 | 0.935-0.965 | ASTM D 1505 | |||
| Environmental Stress Crack Resistance | Hours | 5000 | ASTM D 1693 | |||
| Carbon Black Content | % | 1.5% - 2.0% | ASTM D 1603 | |||
| Nominal Sheet Thickness Before Texturing | mm | 1.27 -5%,+10% | ASTM D 5199 | |||
| Nominal Sheet Thickness After Texturing | mm | 1.52-5%,+10% | ASTM D 5199 | |||
| Seam Peel Strength | N | 1065 | 1420 | 2130 | 2840 | EN ISO 13426-1B |
| Seam Efficiency | % | 100 | GRI-GS13 | |||
| Nominal Expanded Cell Size (width x length) | mm | 320x287,475x508 etc | ||||
| Nominal Expanded Panel Size (width x length) | m | 2.56x8.35, 4.5x5.0, 6.5x4.5, 6.1x2.44 | ||||
Fill in basic information for a fast logistics quote
